Ride-on Scraper 5700
National Flooring Equipment Australia
5700 Ride-On Floor Scraper
A compact battery-powered ride-on floor scraper designed for both hard and soft goods removal, combining commercial removal capability with a narrow 62 cm machine width.
Enquire NowCompact Ride-On Floor Removal
The National Flooring Equipment 5700 is one of National's most popular ride-on floor scrapers. It is designed to remove both hard and soft flooring materials while remaining compact enough for jobs where access and manoeuvrability are important.
At approximately 62 cm wide, the 5700 is narrow enough to fit through many standard residential doorways, helping contractors move between work areas without sacrificing the productivity of a ride-on machine.
The machine is powered by twelve AGM 180 amp-hour batteries and uses hydraulic steering for responsive operator control. A wide range of compatible tooling allows the machine to be configured for different flooring materials and removal conditions.
What Can the 5700 Remove?
The 5700 is designed for both hard and soft goods removal, with tooling selected to suit the flooring material, adhesive and substrate.
Ride-On Productivity Without the Extra Width
- 62 cm machine width helps the 5700 access tighter work areas and pass through many standard doorways.
- Twelve AGM 180 amp-hour batteries provide battery-powered operation for indoor floor removal.
- Designed to remove both hard and soft flooring materials with suitable tooling.
- Hydraulic steering provides smooth and responsive machine control.
- A swivel-head blade holder helps the tooling follow the floor during removal.
- Compatible with a large range of National Flooring Equipment ride-on scraper tooling.
- Well suited to contractors working across both smaller access-restricted sites and commercial projects.
5700 Ride-On Scraper Specifications
Specifications can vary by machine configuration. Contact Syntec Diamond Tools to confirm the current Australian configuration before ordering.
| Power Supply | Battery |
|---|---|
| Battery System | 12 × AGM 180 Ah batteries |
| Width | 62 cm |
| Height | 127 cm |
| Length | Approx. 147 cm – configuration dependent |
| Machine Weight | Configuration dependent |
| Removable Front Weight | Approx. 83.9 kg |
| Maximum Speed | Up to 36.6 m/min; selected variants up to 48.8 m/min |
| International Voltage | 230 V |
| International Frequency | 50 Hz |
See the 5700 in Action
National Flooring Equipment provides operating information, demonstrations and training resources for the 5700 Ride-On Scraper.
5700 Operating & Service Resources
Access National Flooring Equipment's official 5700 operating and service information, including product demonstrations and tooling guidance.
View Official 5700 Resources5700 or 7700?
Both machines are battery-powered ride-on scrapers capable of removing hard and soft goods. The main differences are machine size, weight, speed and the scale of work they are designed to tackle.
5700 Ride-On Scraper FAQs
What is the 5700 designed to remove?
The 5700 is designed for both hard and soft goods. Suitable tooling can be selected for materials including carpet, VCT, hardwood, tile, coatings and other flooring materials.
Will the 5700 fit through a doorway?
The machine is approximately 62 cm wide, making compact access one of the 5700's key advantages compared with larger ride-on scrapers. Always confirm the actual doorway clearance before moving the machine.
What is the difference between the 5700 and 7700?
The 5700 is narrower and lighter. The 7700 is wider, heavier and faster, making it particularly suited to demanding removal and larger open commercial areas.
Can the 5700 remove hard flooring?
Yes. National Flooring Equipment specifies the 5700 for both hard and soft goods. Performance depends on selecting suitable blades, shanks and other tooling for the material being removed.
What blade or tooling should I use?
Tooling selection depends on the flooring material, adhesive, substrate and site conditions. Your local Syntec representative can help select suitable tooling.
Find Your Local Representative
Need help with the 5700, availability, blades or tooling? Contact the Syntec representative for your region.
Northern Territory Contact Representative →
Not sure who to contact?
Tell us where you're located, what material you're removing and the size of the project. We'll connect you with the right representative.
Contact the Australian TeamIs the 5700 Right for Your Project?
Tell us about the material you're removing, your site access and the size of the project. We'll help recommend suitable equipment, blades and tooling for the job.
Get an Equipment Recommendation